Sustainable Kitchens

So many of our clients opt for a timber worktop, which always looks fabulous and adds warmth and character to any kitchen. It’s important to look after it properly, to maximise it’s lifespan and ensure it can continue to work hard for you. The kitchen worktop is undoubtably the workhorse in the busiest room in the house and it does need regular care and maintenance. A well-maintained kitchen worksurface will increase the longevity of your whole kitchen, as you won’t be taking the kitchen apart to replace just one part

To help you look after your wooden worktop, we have produced this quick guide. When we supply timber worktops, we finish them with three coats of Saicos Premium Hardwax Oil 3200 Satin Matt colourless finish and recommend you use this same product for upkeep. If you have purchased your wooden worktop from Sheffield Sustainable Kitchens, you will have been given a care kit to start you off on this process of replenishing the finish. If you need a new kit or a fresh supply, please do get in touch. We sell maintenance kits in various different sizes.

Sheffield Sustainable Kitchens reclaimed timber bath panel
oak breakfast bar detail in grey painted shaker kitchen
Sheffield Sustainable Kitchens bespoke kitchen compact custom kitchen with breakfast bar
oak worktop in new kitchen
Tips for Cleaning and Maintaining your Wooden Worktop

Try to clean any spills up as quickly as possible to avoid possible staining. For cleaning use a damp cloth, if necessary very mildly soapy water can be used. Also, try not to leave water sat on the worktops for prolonged periods, over time it will save on maintenance and keep your worktops looking lovely for longer.

oak worktop in new u-shaped kitchen
Kitchen bamboo worktop and drainer grooves and belfast sink
Sheffield Sustainable Kitchens oak and green compact kitchen with wheeley moveable unit
Sheffield Sustainable Kitchens contemporary oak kitchen with solid oak worktop and feature island and farrow and ball painted cabinet doors
Replenishing Your Wooden Worktops

From time to time your worktops will need topping up with finish. If they’re looking a bit worn, or water droplets fail to bead-up on the surface then they probably need a top-up. Areas around sinks and draining boards and those of heavy usage are the bits most likely to need topping up. Please follow the instructions below:

  1. Assess which areas are in need of topping up, it may just be around the sink, or the whole worktops may need a top up.
  1. Make sure areas to be topped up are clean and dry. A damp cloth should be sufficient for cleaning, if necessary use very mildly soapy water.
  1. Give the tops a very light sand with a sanding pad. We supply you a Mirka Abralon 1000 sanding pad, but something similar is fine.
  1. Clean off the dust with a tack cloth to leave a clean dry surface ready for finishing.
  1. Apply a very thin coat of the enclosed Saicos Premium Hard Wax Oil 3200 with a lint free cotton cloth provided; apply in line with the wood grain. Wipe off any excess as you go.
  1. Worktops should be dry and ready to use again in about 3-4 hours.
new kitchen with shaker hooks and cherry timber workop
new shaker kitchen with feature kitchen island
oak worktop in new u-shaped kitchen
Repairing Damaged Tops

From time to time the odd accident may happen, creating a but for damage to your timber worktop. Don’t panic – it may well be easily resolved as shown below. If you’re unsure, then please don’t hesitate to get in touch.

Dints and Bumps – if something heavy has been dropped on the surface, these may be possible to ‘lift out’ using a damp cloth and an iron. The steam created within the wood lifts the fibres back up into place.

Burning; black mould and more significant damage – It may be best to get in touch with us in this scenario. Some sanding back will be required to remove the damage before re-applying finish to blend back in with the rest of your worktops. Follow the instructions below:

  1. Start by sanding back the area with an 80 grit sandpaper
  2. Once the damage is removed, work up the grits in series, 120, 150 and up to 180 grit.
  3. Clean with the tack cloth and then apply a very thin coat of the Hard Wax Oil with the provided lint free cloth.
  4. Once dry (3-4 hours) ‘knock back’ extremely lightly with a fine grit sand paper (600+) or the Mirka Abralon 1000 pad provided.
  5. Repeat step 3 for the final coat.
  6. The finish should blend in with the rest of the worktops and leave no visible overlaps.
Don't Despair!

If you’re really struggling to revive your worktop, do get in touch, as we offer a refurbishment service. We will happily give you a quote, whether you originally bought the worktop from Sheffield Sustainable Kitchens or not. Don’t let yourself fall out of love with your wooden work surface – remind yourself what a fantastic natural product it is and how amazing it can look with a bit of TLC. Six reasons why our Clients opt for a Wooden Worktop.

ssk-logo-white-transparent

Join our mailing list

We send emails the way we create kitchens - thoughtfully and always worth the while.

Give it a try, you can unsubscribe anytime.